BGrand Posted October 14, 2019 Report Share Posted October 14, 2019 Got it now. Sorry for the previous posts. Quote Link to comment Share on other sites More sharing options...
TYRYFIN Posted October 14, 2019 Author Report Share Posted October 14, 2019 No problem just letting everyone know Quote Link to comment Share on other sites More sharing options...
TYRYFIN Posted October 14, 2019 Author Report Share Posted October 14, 2019 Now comes the million dollar question; what do you do with a 600 gallon tank with a busted seal? Again with Jeremy's help we put some feelers out and found one guy that wanted it as is. After some texts back and forth he was going to bring his friend and pick the tank up. Needless to say when the time came he didn't show up and went silent. This did not surprise me too much and actually made it a little easier, I would have to take the sliding door out twice. I made the decision to breakup the tank and take it piece by piece to my dumpster at work. Now the real fun starts. I started in the back and had some careful fun Quote Link to comment Share on other sites More sharing options...
TYRYFIN Posted October 14, 2019 Author Report Share Posted October 14, 2019 Some more pics 1 Quote Link to comment Share on other sites More sharing options...
TYRYFIN Posted October 14, 2019 Author Report Share Posted October 14, 2019 I would try to break into large pieces that we could carry out to the truck but I also got a lot of small ones that went into Rubbermaid's Quote Link to comment Share on other sites More sharing options...
TYRYFIN Posted October 14, 2019 Author Report Share Posted October 14, 2019 When it was all said and done he we are. All in all it went pretty smooth and only a couple of small cuts that went through heavy gloves. Quote Link to comment Share on other sites More sharing options...
SilentNight1793 Posted October 14, 2019 Report Share Posted October 14, 2019 looks like it was a smashing good time... 1 Quote Link to comment Share on other sites More sharing options...
TYRYFIN Posted October 14, 2019 Author Report Share Posted October 14, 2019 Not too bad, relieved some built up tension. Now it was time to evaluate the system and make needed repairs and modifications. Since the tanks are different sizes and the overflow's are different I would need to remove the sump and stand and start over fresh. I would also need to reconfigure the opening in the wall. Quote Link to comment Share on other sites More sharing options...
TYRYFIN Posted October 14, 2019 Author Report Share Posted October 14, 2019 Got the stand out 1 Quote Link to comment Share on other sites More sharing options...
TYRYFIN Posted October 14, 2019 Author Report Share Posted October 14, 2019 Well with everything out it was time to modify the sump with some baffles and an area to hold filter socks. I was working on this when all s_ _ _ broke loose. While cutting a piece of Plexiglas on the table saw it bound and kicked back, the finger lost that battle. End story is they saved the finger by inserting a 3" pin to hold finger together and fixed all the structural damage. I returned home to contemplate what to do, with less than 3 weeks until the new tank arrives I still had a lot to do. When it rains it pours 1 1 Quote Link to comment Share on other sites More sharing options...
Gonzo620 Posted October 14, 2019 Report Share Posted October 14, 2019 Wow! This is an amazing thread! 👍🏽👍🏽 So excited to see the next posts! I’m following this one more closely. 1 Quote Link to comment Share on other sites More sharing options...
TYRYFIN Posted October 15, 2019 Author Report Share Posted October 15, 2019 After taking a few days off it was back to the work. The work went slow but with help from my boys we pushed on. Here is the modified sump for filter socks Quote Link to comment Share on other sites More sharing options...
waldend Posted October 15, 2019 Report Share Posted October 15, 2019 After your experience and mine I am nervous about cutting it on a table saw. In my case I didn’t have a proper blade for it. It melted and grabbed. Glanced off my hip (which was luckily at a 45deg angle the way I was standing) cutting my jeans before rocketing across the garage. Scary for sure. Glad yours turned out relatively ok! Quote Link to comment Share on other sites More sharing options...
TYRYFIN Posted October 15, 2019 Author Report Share Posted October 15, 2019 I understand totally, mine was a combination of factors. Blade was a cross cut but not with fine enough teeth for thin plexiglass, using the wrong pushing guide, and not waiting for help. Yeah we found the piece 15 yards behind the truck (went over the truck) up against the fence after hitting my finger. It is amazing the speed and force it came off there with. Quote Link to comment Share on other sites More sharing options...
PetesFolly Posted October 17, 2019 Report Share Posted October 17, 2019 Holy Cow Bill! Loved your previous tank and am certainly looking forward to seeing how this all turns out. Very glad to see that your finger will be ok and that you are continuing with the aquarium build! 1 Quote Link to comment Share on other sites More sharing options...
TYRYFIN Posted October 17, 2019 Author Report Share Posted October 17, 2019 Fast forward to the first of August, the stand is now complete and just waiting on the tank Quote Link to comment Share on other sites More sharing options...
TYRYFIN Posted October 17, 2019 Author Report Share Posted October 17, 2019 Tank arrived 1 Quote Link to comment Share on other sites More sharing options...
TYRYFIN Posted October 17, 2019 Author Report Share Posted October 17, 2019 Some more Pictures. It sat on the deck until the weekend when it was set in place Quote Link to comment Share on other sites More sharing options...
TYRYFIN Posted October 17, 2019 Author Report Share Posted October 17, 2019 Had to remove the sliding glass door and in she went, thanks to all that helped 1 Quote Link to comment Share on other sites More sharing options...
MrsBugmaster Posted October 17, 2019 Report Share Posted October 17, 2019 On 10/14/2019 at 4:55 PM, TYRYFIN said: Well with everything out it was time to modify the sump with some baffles and an area to hold filter socks. I was working on this when all s_ _ _ broke loose. While cutting a piece of Plexiglas on the table saw it bound and kicked back, the finger lost that battle. End story is they saved the finger by inserting a 3" pin to hold finger together and fixed all the structural damage. I returned home to contemplate what to do, with less than 3 weeks until the new tank arrives I still had a lot to do. When it rains it pours Ouch! Quote Link to comment Share on other sites More sharing options...
MrsBugmaster Posted October 17, 2019 Report Share Posted October 17, 2019 Good choice on the Planet Aquarium brand. Hope the rest goes without problems! Quote Link to comment Share on other sites More sharing options...
TYRYFIN Posted October 18, 2019 Author Report Share Posted October 18, 2019 Plumbing this time around went as good as it could, I was not in a hurry and I rearranged the skimmer and UV to be more accessible so things went pretty smooth. I also changed from external to internal pumps for this tank and added an additional one to help with all the auxiliary equipment. This eliminated one large manifold system that was complex to build the last time. The tank has a center overflow with all connection inside of it. The (3) two inch drain lines were dropped straight down into the sump with 1/4 turn valves to regulate flow and the (2) 1.5 inch returns were plumbed separately to ensure that if one pump failed then flow would continue between the sump and tank. The skimmer, chiller, calcium reactor, and the Macro-algae Reactor were plumbed to one of the return pumps and the UV was plumbed to the second return pump. I also learned from previous builds to use as many unions as I can, this helped to prevent bad joints. I had the back panel drilled in each corner with (2) two inches holes, one would be used for the closed loop and the other one is what I call the Oh S_ _T hole. This is for the off chance that the drains to the sump clog and would keep the tank from over filling. I will post some pictures later 1 Quote Link to comment Share on other sites More sharing options...
TYRYFIN Posted October 22, 2019 Author Report Share Posted October 22, 2019 The return pumps in the sump Quote Link to comment Share on other sites More sharing options...
TYRYFIN Posted October 22, 2019 Author Report Share Posted October 22, 2019 skimmer 1 Quote Link to comment Share on other sites More sharing options...
TYRYFIN Posted October 22, 2019 Author Report Share Posted October 22, 2019 UV 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.