calebtrueblue Posted March 21, 2016 Report Share Posted March 21, 2016 I need to get a frag rack for my 60 rimless. I tried the eshopps, but the glass was too thick for the magnets and it kept falling off. I tried a cheap suction cup one too, but that fell off as well. Anyone had good luck with one not falling off all the time? Quote Link to comment Share on other sites More sharing options...
chac317 Posted March 21, 2016 Report Share Posted March 21, 2016 I got both of mine from eBay. I also didn't like the eshopps ones. Search magnetic frag rack and they should be called pure flow N52 something. They are clear plastic. Very strong magnets and they have smaller holes in the rack to allow water to flow all around the frags. A bunch of shapes and sizes around $8-30 based on size. Quote Link to comment Share on other sites More sharing options...
Luke33 Posted March 21, 2016 Report Share Posted March 21, 2016 Also one of the vendors that was here for the swap had some nice one's they made. I think it was 3 d printing aquarium supply or something like that. Quote Link to comment Share on other sites More sharing options...
chopper320 Posted March 21, 2016 Report Share Posted March 21, 2016 I just glue a piece of eggcrate to a magfloat and it works great. You can cut the egg crate to whatever size you want your frag rack to be and the squares fit a frag plug perfectly. Quote Link to comment Share on other sites More sharing options...
calebtrueblue Posted March 21, 2016 Author Report Share Posted March 21, 2016 I'll try that one off ebay. It says up to 1/2" glass which is what mine is. I'll report back when I get it and see if it stays up. 1 Quote Link to comment Share on other sites More sharing options...
calebtrueblue Posted April 4, 2016 Author Report Share Posted April 4, 2016 Been up for a week with no issues. really strong magnets, highly recommended. Quote Link to comment Share on other sites More sharing options...
Kyle Curtsinger Posted March 16, 2018 Report Share Posted March 16, 2018 On 3/21/2016 at 3:04 PM, Luke33 said: Also one of the vendors that was here for the swap had some nice one's they made. I think it was 3 d printing aquarium supply or something like that. I have 3d printed a few frag racks. They work really well you just need to seal the magnet with silicone. Quote Link to comment Share on other sites More sharing options...
puffdragon Posted March 19, 2018 Report Share Posted March 19, 2018 I'm with Chopper on this one The mag floats will hold up a lot of frags. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.